EMCO Hyperturn 645MC Plus
EMCO - Hyperturn 645MC Plus
2009
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Machine Tools
- EMCO Hyperturn 645MC Plus Lathe machine
This EMCO Hyperturn 645MC Plus Lathe machine was made in 2009 in Austria. It is equipped with a SIEMENS 840 D control unit. This machine works with a spindle speed range 0-7000 rpm and a spindle motor power of 17/22 kW. Very good condition
Overview
- brand: EMCO
- year: 2009
- MODEL: Hyperturn 645MC Plus
- application type: Turning
- Location: United Kingdom
- machine type: Lathe
- availability: Sold
- control unit brand: SIEMENS
- GINDUMAC ID: GB-TUR-EMC-2009-00001
Technical Information
General Data
- Measurements width: 3400 mm
- Measurements depth: 2550 mm
- Measurements height: 2300 mm
- Machine weight: 9500 kg
Control Unit
- Brand: SIEMENS
- Model: 840D
Main drive
- Number of spindles: 1
- Spindle speed range: 7000 1/MIN
Movement
- X-AXIS Movement: X1/X2 280/205 mm
- Y-AXIS Movement: +/- 50 mm
- Z-AXIS Movement: Z1/Z2/Z3 900/750/750 mm
- B-AXIS Movement: 210 DEGREES MM
- C-AXIS Movement: 0.001 DEGREE MM
Turret
- Number of turrets: 1
Tools
- Slots in storage: 24
- Type of tool holder: CAPTO C4
Media
- Chip conveyor: Yes
Additional Information
- Technical Machine Benefits:
- - Swing over bed 600 mm
- - Swing over cross-slide 500 mm
- - Maximum cutting length 744 mm, diameter 430 mm
- - Maximum cutting diameter 430 mm
- - Bar capacity 45 mm
- - Milling rpm 10. 000, power 14. 5 kw
- - Spindle motor power 17/22 kw
- - Sub spindle speed 7000rpm, sub spindle motor 17/22kw
- - Turret milling motor 6. 7kw, 12 stations
- - C axis & milling, internal spindle, coolant, y-axis, low volt light, 3 jaw chuck, b axis, swarf conveyor, sub spindle, lower turret
- Qualitative Machine Benefits:
- - Very good condition
- - Machine manual
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing