DOOSAN 3100L
DOOSAN - 3100L
2013
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Machine Tools
- Doosan Puma 3100L Lathe
This Doosan Puma 3100L Lathe was made in 2013 in the United States. It is equipped with a FANUC i Series with iGuide control unit and has 2 axis. The machine has a spindle speed of 2800 rpm, is in very good condition and well maintained.
Overview
- brand: DOOSAN
- year: 2013
- MODEL: 3100L
- application type: Turning
- Location: United Kingdom
- machine type: Lathe
- availability: Sold
- control unit brand: FANUC
- GINDUMAC ID: GB-TUR-DOO-2013-00001
Technical Information
General Data
- Measurements width: 5599 mm
- Measurements depth: 2067 mm
- Measurements height: 2010 mm
- Machine weight: 7350 kg
Control Unit
- Brand: FANUC
- Model: i Series with iGuide
Main drive
- Number of spindles: 1
- Spindle speed range: 2800 1/MIN
- Number of axis: 2
Movement
- X-AXIS Movement: 293 mm
- Z-AXIS Movement: 1350 mm
Turret
- Number of turrets: 1
Tools
- Slots in storage: 10
Additional Information
- Technical Machine Benefits:
- - Swing over bed 850 mm
- - Swing over the cross-slide: 670mm
- - Maximum cutting diameter: 525 mm
- - Maximum cutting length: 1310mm
- - Spindle motor power: 22/18. 5kw
- - Spindle nose: a2-11
- - Bar capacity: 102mm
- - Rapid feedrates: xz: 30m/minute
- - 3tailstock quill diameter 100mm, mt #5
- - Swarf conveyor, tool setter, 3 jaw chuck, tooling, coolant, interlocked guards, low volt light
- Qualitative Machine Benefits:
- - Very good condition!
- - Chuck diameter: 300mm
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing