AgieCharmilles MIKRON VCE 1400 PRO
AgieCharmilles - MIKRON VCE 1400 PRO
2009
67,000 €
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Machine Tools
- AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center
This AgieCharmilles MIKRON VCE 1400 PRO Vertical machining center was manufactured in the year 2009 in Switzerland and has 30978 hours, of which 13309 are spindle hours. It is equipped with Heidenhain iTNC 530 control unit and has 3 axis. The machine has a spindle speed of 100 - 10000 rpm, and includes a RENISHAW 3D IR Measuring Probe MP12, Tool measuring probe 3D TS27, and a Set of tool holders as additional equipment, is in very good condition and well maintained.
Overview
- brand: AgieCharmilles
- year: 2009
- MODEL: MIKRON VCE 1400 PRO
- production hours: 30978
- application type: Milling
- Location: Poland
- machine type: Machining centers (vertical)
- availability: Immediately
- control unit brand: Heidenhain
- GINDUMAC ID: PL-MIL-AGI-2009-00001
Technical Information
General Data
- Measurements width: 3420 mm
- Measurements depth: 3250 MM
- Measurements height: 2790 mm
- Machine weight: 8700 kg
Control Unit
- Brand: Heidenhain
- Model: iTNC 530
Main drive
- Spindle speed range: 100 - 10000 1/MIN
- Spindle motor power: 12/18 kW
- Tool taper: BT 40
- Number of axis: 3
Movement
- X-AXIS Movement: 1400 mm
- X-AXIS Rapid traverse: 24 m/min
- Y-AXIS Movement: 650 mm
- Y-AXIS Rapid traverse: 24 m/min
- Z-AXIS Movement: 675 mm
- Z-AXIS Rapid traverse: 20 m/min
Table
- Outer length: 1400 mm
- Outer width: 620 mm
Tools
- Slots in storage: 24
- Max weight: 6 kg
- Max tool length: 305 mm
Media
- Main electronic connection: 3x400V / 50-60 Hz
Additional Equipment
- - RENISHAW 3D IR Measuring Probe MP12
- - Tool measuring probe 3D TS27
- - Set of tool holders
Additional Information
- Qualitative Machine Benefits:
- - The machine is in very good working condition, well maintained, ready for tests.
- - The machine spindle was fully refurbished and has been in operation for around 2000 hours since then.
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing
