DECKEL MAHO DMC 835 V
DECKEL MAHO - DMC 835 V
2007
39,000 €
Do you have further questions? Contact us.

Borja Garcia
+34 679 019 350
b.garcia@gindumac.com

- GINDUMAC
- Products
- Machine Tools
- DMG DECKEL MAHO DMC 835 V Vertical Machining center
This DECKEL MAHO DMC 835 V Vertical Machining center was made in 2007 and has 30129 hours. It is equipped with a HEIDENHAIN TNC 530 control unit and has 3 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.
Overview
- brand: DECKEL MAHO
- year: 2007
- MODEL: DMC 835 V
- production hours: 30129
- application type: Milling
- Location: Poland
- machine type: Machining centers (vertical)
- availability: Immediately
- control unit brand: HEIDENHAIN
- GINDUMAC ID: PL-MIL-DMG-2007-00001
Technical Information
Control Unit
- Brand: HEIDENHAIN
- Model: ITNC 530
Main drive
- Spindle speed range: 10000 1/MIN
- Spindle motor power: 13/89kW
- Number of axis: 3
Movement
- X-AXIS Movement: 835 mm
- Y-AXIS Movement: 510 mm
- Z-AXIS Movement: 510 mm
Table
- Outer length: 1000 mm
- Outer width: 560 mm
- Table load: 800 kg
Tools
- Slots in storage: 40
- Type of tool holder: SK 40
Additional Information
- Technical Machine Benefits:
- - Electronic handwheel
- - Tool measurement probe tt130
- - Internal coolant supply through the center of the spindle, ikz belt filter system 20 bar / 600 liters
- - Chip conveyor, gun for flushing the working area
- - Compressed air blow-through the spindle activated by m functions
- - Machine bed flushing system
- - Workspace roof
- - Work mode 4 - ability to work with the open door of the workspace
- - Two-circuit hydraulic unit 50-240 bar for zero-point systems- this additional hydraulic aggregate
- - Automatic machine right door for efficient workpiece loading robot interface
- Qualitative Machine Benefits:
- - The machine is in very good working condition and ready for tests
- - Documentation and full vot geometric report available.
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing