MIKRON - UCP 600ES-MIL-MIK-2000-00001
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Machine Tools
- ➤ Used MIKRON UCP 600 For sale | gindumac.com
This 5-axis MIKRON UCP 600 vertical machining center was manufactured in 2000. It features a spindle speed of 42,000 rpm, a spindle power of 14 kW, and a rapid feed rate of 22 m/min. The machine includes a Heidenhain 430M CNC, Renishaw OMP 40 probe, and can handle a maximum table load of 200 kg. Ideal for complex and precise machining tasks, the MIKRON UCP 600 machine we have for sale is well-maintained and upgraded. Contact us for further details.
Overview
- brand: MIKRON
- year: 2000
- MODEL: UCP 600
- application type: Milling
- Location: Spain
- machine type: Universal Machining Centre
- availability: Immediately
- control unit brand: Heidenhain
Technical Information - MIKRON UCP 600
Control Unit
- Brand: Heidenhain
- Model: 430M
Main drive
- Spindle speed range: 42,000 1/MIN
- Spindle motor power: 14 kw
- Tool taper: HSK E-40
Movement
- X-AXIS Movement: 530 mm
- X-AXIS Working Feed: 15 m/min
- X-AXIS Feed Force: 22 m/min
- Y-AXIS Movement: 450 mm
- Y-AXIS Working Feed: 15 m/min
- Y-AXIS Feed Force: 22 m/min
- Z-AXIS Movement: 450 mm
- Z-AXIS Working Feed: 15 m/min
- Z-AXIS Feed Force: 22 m/min
Table
- Table load: Max 200kg
Tools
- Slots in storage: 36
- Max tool diameter: 16 mm
Additional Equipment
- - Workpiece Measurement Probe: Renishaw OMP 40
- - Workpiece Breakage Probe: BLUM (included but not installed)
- - Thermal cones, collet chucks, and Franken PGR holders
- - Custom-made post-processor for Mastercam with direct machine simulation
Additional Information
- Technical Machine Benefits:
- - Tool change time: 5 seconds
- - Cradle rotation: -15º to 122º
- - Table diameter: 280 mm
- Qualitative Machine Benefits:
- - Upgrades made to enhance the machine's precision, including a lubricated bushing on the cradle support, the spindle has been serviced with new bearings, tie rods, etc. , the bellows are brand new, and components that were worn out from use have been replaced
- - The original support was directly on cast iron, which tended to seize up
- - Machine still under power
Machine Benefits
Extra information
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing
Products related to MIKRON UCP 600
F5
Makino - Vertical Machining Centre
RXU 1001
Röders TEC - Vertical Machining Centre
NHX6300
DMG MORI - Horizontal Machining Centre
DMU 50 evo linear
DMG - Vertical Machining Centre
C30U
HERMLE - Vertical Machining Centre
U5-620
SPINNER - Universal Machining Centre
UX600/15C
Quaser - Vertical Machining Centre
UMC-500SS
HAAS - Universal Machining Centre
FP4 60
DECKEL - CNC Milling Machine
MB 56-VA
Okuma - Vertical Machining Centre
HEP - 3150
HARTFORD - Vertical Machining Centre
PICOMAX 95 + EROWA
FEHLMANN - Universal Machining Centre