MORI SEIKI NL3000Y/1250
MORI SEIKI - NL3000Y/1250
2008
82,000 €
Do you have further questions? Contact us.

Borja Garcia
+34 679 019 350
b.garcia@gindumac.com

- GINDUMAC
- Products
- Machine Tools
- Mori Seiki NL3000Y/1250 Lathe
This Mori Seiki NL3000Y/1250 Lathe was manufactured in the year 2008 in Japan. It is equipped with a Mori MSX-850III control unit and has 5 axis. The machine has a spindle speed of 3000 rpm.
Overview
- brand: MORI SEIKI
- year: 2008
- MODEL: NL3000Y/1250
- application type: Turning
- Location: United Kingdom
- machine type: Lathe
- availability: Immediately
- control unit brand: Mori
- GINDUMAC ID: GB-TUR-MOR-2008-00002
Technical Information
Control Unit
- Brand: Mori
- Model: MSX-850III
Main drive
- Number of spindles: 1
- Spindle speed range: 3000 1/MIN
- Spindle motor power: 22/18.5k KW
- Number of axis: 5
Movement
- X-AXIS Movement: 280 mm
- Y-AXIS Movement: +/-60 mm
- Z-AXIS Movement: 1370 mm
Turret
- Number of turrets: 1
Tools
- Slots in storage: 12
Media
- Power consumption: 49 kva
- Chip conveyor: Yes
Additional Information
- Technical Machine Benefits:
- - Swing over bed: 995mm
- - Swing over the cross-slide : 825mm
- - Maximum cutting diameter: 420 mm
- - Bar capacity: 90 mm
- - Maximum cutting length: 1260mm
- - Milling motor power: 5. 5/3. 7kw, speed 6000rpm
- - Rapid feedrates : xz: 30m/minute
- - Tailstock body travel: 1284 mm
- - Tool setter, 3 jaw chuck, coolant, interlocked guards, low volt light
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing