WEMO Punching-Bending-System
WEMO - Punching-Bending-System
1992
60,000 €
Do you have further questions? Contact us.
Borja Garcia
+34 679 019 350
b.garcia@gindumac.com
- GINDUMAC
- Products
- Sheet Metal Machinery
- WEMO Punching-Bending-System
This WEMO Punching-Bending-System was manufactured in the year 1992 in Germany. It is in good condition due conscientious and documented maintenance. The machine is still in operation and can be viewed and inspected at any time. It will be delivered including accessories from operator's stock. Max. length of the parts is 2 meters and width is limited to approx. 1.10 meters. As for sheet thickness, everything between 0.5 and 1.25 mm can be processed. The Machine including roller conveyor at the end, has a length of approx. 31 meters and a width of around 16 meters (see drawing layout PDF attached below).
Overview
- brand: WEMO
- year: 1992
- MODEL: Punching-Bending-System
- production hours: 22330
- application type: Bending
- Location: Germany
- machine type: Bending machines
- availability: Immediately
- GINDUMAC ID: DE-BEN-WEM-1992-00001
Technical Information
Additional Equipment
- - Machine will be sold including accessories from operater's stock
Additional Information
- Technical Machine Benefits:
- - Sheet thickness, everything between 0. 5 and 1. 25 mm can be processed
- - Max. Length of the parts is 2 meters
- - Width approx. 1. 10 meters (limit)
- Qualitative Machine Benefits:
- - Due to conscientious and documented maintenance, it is in good condition
- - The machine is still in operation and can be viewed and inspected at any time
- - Machine incl. roller conveyor at the end, has a length of approx. 31 meters, width of ~ 16 meters (see drawing PDF attached)
Machine Benefits
Extra information
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing