DMG MORI NVX 5080II
DMG MORI - NVX 5080II
2013
110,000 €
Do you have further questions? Contact us.

Borja Garcia
+34 679 019 350
b.garcia@gindumac.com

- GINDUMAC
- Products
- Machine Tools
- DMG MORI NVX 5080II Vertical Machining center
This DMG MORI NVX 5080II Vertical Machining center was manufactured in the year 2013 in Japan and has 1326 production hours, of which 1018 are spindle hours. It is equipped with a MAPPS IV control unit and has 3+2 axis. The machine has a spindle speed of 20000 rpm.
Overview
- brand: DMG MORI
- year: 2013
- MODEL: NVX 5080II
- production hours: 1326
- application type: Milling
- Location: Denmark
- machine type: Machining centers (vertical)
- availability: Immediately
- control unit brand: MAPPS IV
- GINDUMAC ID: DK-MIL-DMG-2013-00001
Technical Information
Control Unit
- Brand: MAPPS IV
Main drive
- Spindle speed range: 20000 1/MIN
- Spindle motor power: 15/ 11 kW
- Tool taper: BT40
- Number of axis: 3+2
Movement
- X-AXIS Movement: 800 mm
- Y-AXIS Movement: 530 mm
- Z-AXIS Movement: 510 mm
Table
- Outer length: 1100 mm
- Outer width: 600 mm
- Table load: 1000 kg
Tools
- Slots in storage: 30
- Type of tool holder: BT40 DIN40
Additional Information
- Technical Machine Benefits:
- - Slideways are used for all axes
- - Available with three x-axis strokes (600/800/1,050 mm)
- - 23% higher rigidity achieved by the use of a spindle with a large-diameter bearing
- - Coolant circulation inside the castings (option)
- - The ddrt rotary table is available as an option
- - Approx. 21% reduction in standby power consumption3
- - High column 200 mm
- - The distance from the gauge line to the table surface: 860 mm
Machine Benefits
*There may be differences between the data shown and the actual values, this should be confirmed by the sales representative.
Borja Garcia
Payment Terms
Payment in advance
Asset Financing